TC Electronic
| Reverb | Delay & Effects | Dynamics & EQ | Loudness & Monitoring
Introduction | Features | Tech Specs | Manuals & Goodies

Technical Specification

General
Input Sensitivity
Adjusts input gain ±10 dB
PPM Meter
PPM 5 section led input meter
Bypass
Individual electronic bypass
Intensity
Mode 1: Amount of Clean Signal
Mode 2
Amount of Effect Signal
Mode 3
Amount of Positive Feedback
Mode 4
Amount of Negative Feedback
Speed
LFO Speed 0.1 Hz to 10 Hz
Width
Depth of Modulation 0 to 100%
Delay
Time from Approx. 0.65 to 21 mSec.
Stereo Input
Disables Mix of Input Signals
Separate Input
Divides unit into two separate channels
Sweep Sync
In Normal Mode - Synchronizes the Two LFO Delay Modulators In-Phase
In Separate Mode - (Both Channels On) Mixes the LFO Delay Modulators
Cross Off
In Normal Mode - Disables Audio Cross Mixing of the Two Channels
In Separate Mode - Disables the Bypass Link of the Two Channels
Direct Mute
(On Rear Panel) mutes direct signal
Frequency Response
10-100.000 Hz, +0 / -1 dB (Direct)
20-20.000 Hz, +0 / -3dB (Delay)
Dynamic Range
>100 dB
THD
< 0.001% 1 KHz, 0 dBu (Direct)
< 0.03% 1 KHz, 0 dBu (Delay)
Gain
±10 dB Inputs, Unity outputs
Channel Separation
> 70 dB
Maximum Input Level
+12 dBm (Phone), +22 (XLR)
Maximum Output Level
+16 dBm (Phone), +22 (XLR)
Input Impedance
1MOhm (Phone), 20 K Ohm (XLR)
Output Impedance
100 Ohm (Phone), 50 Ohm (XLR)
Delay Type
Analog Bucket Brigades, differentially coupled Selectable 110/220V
Power Requirements
50-60Hz, 18W
Weight
3.5 Kgs. (8Lbs.)
Dimensions
1 3/4 x 19 x 7.3 inches (44 x 482 x 185mm)
Finish
Black anodized aluminium faceplate
Black painted steel chassis

Latest
Meet us at IBC 2012
Check how high the bar is set in loudness metering and processing. Visit us at this year's IBC. We are proud to display a wide range of loudness meters that are fully compliant with all of the major international broadcast standards such as EBU R128, ATSC A/85 and ITU-R BS.1770-2.

Where to buy

Click here to find a TC Electronic dealer near you

Software
Radar Meter Bundle for Pro Tools | HD
Radar Meter Bundle for Pro Tools HD is a complete loudness meter package that is perfect for all post and production studios whether they deliver for broadcast or cinema. Radar Meter Bundle is a free upgrade for existing LM5D users. Please note that the iLok license is named "LM5D".

Userstory
TC Equips New DR Building
DR chose the Dynaudio Acoustics AIR series as the standard monitoring setup in all sound and video editing suites.