Technical Specifications
Max. Input Level (XLR) |
 |
+22 dBu |
|
Max. Output Level (XLR) |
|
+22 dBu |
|
Max. Input Level (Jack) |
|
+14 dBu |
|
Max. Output Level (Jack) |
|
+10 dBu |
|
Input Impedance (Jack/XLR) |
|
1 MOhm unbal. / 20 kOhm bal. |
|
Output Impedance (Jack/XLR) |
|
750 Ohm unbal./ 50 Ohm Electronically bal. |
|
Frequency Response |
|
20-20 kHz, +0 / -0.5 dB, 25 kHz, -3dB |
|
Total Harmonic Dist. |
|
< 0.05% 1 kHz, 0 dBm |
|
Dynamic Range |
|
>100 dB |
|
Group Delay |
|
<30 microseconds |
|
Delay Resolution |
|
0.1 mSec to 999.9 mSec. then 1 mSec |
|
Digital-Conversion |
|
Dynamic Differential Delta Sigma |
|
Sampling Rate |
|
1 MHz, no downsampling used |
|
Operating Temperature |
|
32° to 122° (0°C to 50°C) |
|
Storage Temperature |
|
-22°F to 167°F (30°C to 70°C) |
|
Shipping Weight |
|
12 lbs (5.7 kg) |
|
Net Weight |
|
19 lbs (6.4 kg) |
|
Input/Output |
|
1/4" Phone & XLR |
|
Rear Panel Control |
|
Assign Switch and TC LINK or TC 0144 Serial Jack |
|
MIDI |
|
In/Thru/Out |
|
Input Gain |
|
Adjusts input gain ± 10 dB |
|
Input Level |
|
PPM 5 section LED input meter labeled to indicate: -20, 10,-3,0,+3 |
|
Bypass |
|
Single control electronic bypass, Non-volatile memory function |
|
Feedback Controls |
|
Low Pass at 8, 4, 2 kHz,Hi Pass at 100, 200, 400 Hz Level in % and Phase inversion of feedback |
|
Output Volume |
|
Delay, Direct, Delay + Direct, location of same in L &R outputs, phase invertion of Delay |
|
Modulation Controls |
|
Individual control for Delay, Pan & Dynamic. |
|
Waveforms |
|
Sine, Random, Envelope & Trig |
|
Pan Section |
|
Panning of direct signal, Delay signal or both |
|
Dyn Section |
|
Enables Gating, Ducking, Sampling and Auto Trig |
|
Delay Time |
|
Multi function 4 digit display reads Delay Time and Special Function Values |
|
Delay Up-Down |
|
Scroll buttons for adjusting Delay time |
|
Learn |
|
Tap in Delay times, start/stop of sample |
|
Keyboard |
|
Numeric Keypad for parameter entry |
|
Preset |
|
Enters Preset mode |
|
Store |
|
Stores updated preset |
|
Keys A & B |
|
Programmable "Soft Keys" Sets record mode and edit points in sample mode |
|
Channel & Enable |
|
MIDI Channel & MIDI in enable |
|
Change |
|
Enables External Effects Loop mode |
|
Spec |
|
Enters Special Key Function Mode |
|
Power |
|
Front panel on/off switch |
|
Parts and Labor |
|
1 year |
|
Power Requirements |
|
Selectable: 100/120/ 220/ 240V, 50-60 Hz, 30W |
|
Dimensions |
|
3 1/2 x 19 x 9.5 inches (89 x 482 x 242 mm) |
|
Finish |
|
Black anodized aluminum face
Black painted steel chassis |
|
|
|
|
 |
Meet us at IBC 2012
Check how high the bar is set in loudness metering and processing. Visit us at this year's IBC. We are proud to display a wide range of loudness meters that are fully compliant with all of the major international broadcast standards such as EBU R128, ATSC A/85 and ITU-R BS.1770-2.
|
Click here to find a TC Electronic dealer near you |
Radar Meter Bundle for Pro Tools | HD
Radar Meter Bundle for Pro Tools HD is a complete loudness meter package that is perfect for all post and production studios whether they deliver for broadcast or cinema.
Radar Meter Bundle is a free upgrade for existing LM5D users.
Please note that the iLok license is named "LM5D".
|
TC Equips New DR Building
DR chose the Dynaudio Acoustics AIR series as the standard monitoring setup in all sound and video editing suites.
|
|
.jpg)
.jpg)