technical specifications
Digital Inputs and Outputs
|
Connectors |
 |
XLR (AES/EBU) RCA Phono (S/PDIF) |
|
Formats |
|
AES/EBU (24 bit), S/PDIF (20 bit), EIAJ CP-340, IEC 958 |
|
Output Dither |
|
HPF TPDF dither 8-24 bit |
|
Word Clock Input |
|
BNC, 75 Ohm, 0.6 to 10 Vpp |
|
Sample Rates |
|
32 kHz, 44.1 kHz, 48 kHz |
|
Processing Delay |
|
0.5 ms @ 48 kHz |
|
Frequency Response DIO |
|
DC to 23.9 kHz ± 0.01 dB @ 48 kHz |
|
Sample Rate Conversion Type |
|
Asynchronous |
|
Dynamic Range |
|
120 dB |
|
THD+N |
|
-106 dB 44.1 to 48 kHz @ 1 kHz, -2 dBFS |
|
Connectors |
|
XLR balanced (pin 2 hot) |
|
Impedance |
|
20 kOhm (balanced) |
|
Max. Input Level |
|
+27 dBu (balanced) |
|
Min. Input Level (for 0 dBFS) |
|
-4 dBu (balanced) |
|
A to D Conversion |
|
24 bit (1 bit, 128 times oversampling) |
|
A to D Delay |
|
0.8 ms @ 48 kHz |
|
Dynamic Range |
|
>103 dB (unweighted), >106 dB(A) |
|
THD |
|
-95 dB (0.0018 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu) |
|
Frequency Response |
|
10 Hz to 20 kHz: +0/-0.2 dB |
|
Crosstalk |
|
<-80 dB, 10 Hz to 20 kHz typical -100 dB @ 1 kHz |
|
Connectors |
|
XLR balanced (pin 2 hot) |
|
Bypass |
|
Through relay |
|
Impedance |
|
40 Ohm (balanced) |
|
Max. Output Level |
|
+26 dBu (balanced) |
|
Full Scale Output Range |
|
-4 dBu to +26 dBu (balanced) |
|
D to A Conversion |
|
24 bit (1 bit, 128 times oversampling) |
|
D to A Delay |
|
0.57 ms @ 48 kHz |
|
Dynamic Range |
|
>100 dB (unweighted), >104 dB(A) |
|
THD |
|
-86 dB (0.005 %) @ 1 kHz, -6 dBFS (FS @ +18 dBu) |
|
Frequency Response |
|
10 Hz to 20 kHz: +0/-0.5 dB |
|
Crosstalk |
|
<-60 dB, 10 Hz to 20 kHz typical -90 dB @ 1 kHz |
|
Complies with |
|
EN 55103-1 and EN 55103-2 FCC part 15, Class B CISPR 22, Class B |
|
Certified to |
|
IEC 65, EN 60065, UL 1419 and CSA E65 |
|
Operating Temperature |
|
32° F to 122° F (0° C to 50° C) |
|
Storage Temperature |
|
-22° F to 167° F (-30° C to 70° C) |
|
Humidity |
|
Max. 90% non-condensing |
|
Connectors |
|
PC Card, 68 pin type 1 cards |
|
Standards |
|
PCMCIA 2.0, JEIDA 4.0 |
|
Card Format |
|
Supports up to 2 MB SRAM |
|
RS485/RS422 |
|
In/Out/Through: 5 Pin DIN |
|
GPI, Pedal, Fader |
|
1/4 inch phone jack |
|
Finish |
|
Anodized aluminum face and top plate, Plated and painted steel chassis |
|
LCD |
|
56 x 128 dot graphic LCD-display |
|
Dimensions |
|
19" x 1.75" x 8.2" (483 x 44 x 208 mm) |
|
Weight |
|
5.2 lb. (2.35 kg) |
|
Mains Voltage |
|
100 to 240 VAC, 50 to 60 Hz (auto-select) |
|
Power Consumption |
|
<20 W |
|
Backup Battery Life |
|
>10 years |
|
Parts and Labor |
|
3 Years |
|
|
|
|
 |
Please fill out the fields marked in red
|
As an owner of a TC Electronic HD product, you are
entitled to receive HD Support at all times. No matter where you are based,
you can always contact our dedicated support team. Don't hesitate to get in touch
Read more
|
Meet us at IBC 2012
Check how high the bar is set in loudness metering and processing. Visit us at this year's IBC. We are proud to display a wide range of loudness meters that are fully compliant with all of the major international broadcast standards such as EBU R128, ATSC A/85 and ITU-R BS.1770-2.
|
Click here to find a TC Electronic dealer near you |
More Power to The P2
Acclaimed P2 loudness correction and optimization processor is upgraded to include ITU-R BS.1770-2, EBU R128, ATSC A/85 and TR-B32 based signal handling.
|
J. Mark King
J. Mark King, broadcast mixer for the recent star-studded Annual Academy of Country Music Awards from the MGM Grand on Sunday May 18, depended upon a TC Electronic DB-8 Television Processor to automatically upmix his two-channel stereo music mixes into full 5.1-channel surround sound.
|
|
