|
- Insert the PCMCIA card containing the application software.
- PRESS AND HOLD THE “ENTER” KEY, WHILE
POWERING UP. - Use the "VALUE KNOB" to select "Load" in the display.
- Press the "ENTER" key to confirm.
- Wait until the unit has finished loading the application software
- Restart the unit.
- PRESS AND HOLD THE “BYPASS” KEY, WHILE
POWERING UP, TO ACCESS THE SELF TEST - Use the "PARAMETER" knob to select a test.
- Press the "ENTER" key to activate or deactivate a test.
Resetting the unit: - Power up the unit while pressing and holding the "ENTER" button.
- Scroll until you can see "RESET" in the display, please make sure to backup all presets!
- Confirm reset by pressing "ENTER".
- Restart the unit.
Sound check!comming soon!
Finish up: - Enter the self test menu.
- Press all buttons and make sure all are working correctly.
- Feed a signal through the unit and knock test it, listen for any sound changes, click or noise sounds.
- Power OFF the unit by pressing and holding the "ON/OFF" button(Notice if the POWER LED blinks when in OFF state, its normal)
- Power off and on a couple of times to ensure it starts up properly every time and check if the latest software is installed.
|
|