|
SIGNAL FLOWPlease click here to open the signal flow page.
Self test menu- To enter the Self test menu press and hold "BYPASS" button.
- Power on the unit.
- Scroll to "Run Test Program" and follow the instructions on the screen confirm your choice by pressing "HELP".
Reset System Parameters: - Power up the unit while pressing and hold the "BYPASS "button.
- Scroll to "Reset System" resetting the unit will NOT delete the user presets of the DBMAX.
- Restart the unit.
Sound check!In the making! Finish up: - Enter the self test menu.
- Press all buttons and make sure all are working correctly.
- Feed a signal through the unit and knock test it, listen for any sound changes, click or noise sounds.
- Power OFF the unit by pressing and holding the "ON/OFF" button(Notice if the POWER LED blinks when in OFF state, its normal)
- Power off and on a couple of times to ensure it starts up properly every time and check if the latest software is installed.
|
|